VALIDATION METHOD OF DETERMINATION OF Cd (II) IN NPK FERTILIZER BY FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY AT THE QUALITY CONTROL LABORATORY, PT. PUPUK KALIMANTAN TIMUR
Abstract
The research about validation method of determination of Cd (II) in NPK fertilizer by Flame Atomic Absorption Spectrophotometry at the Quality Control Laboratory, PT. Pupuk Kaltim has been done. Determination of Cd (II) was done by referring to the Indonesian National Standard (SNI) 2803:2012. Based on the research results obtained by the correlation coefficient (r) was 0.9991; reproducibility with a relative standard deviation (RSD) value was 4.502 % less than 2/3 CV Horwitz was 9.757 and repeatability with a relative standard deviation (RSD) value was 5.225% less than 2/3 CV Horwitz was 9.695; % recovery was in the range of 80-110 % with an average was 98.56 %; limit of detection was 0.056 mg/kg and limit of quantitation was 0,066 mg/kg; uncertainty estimation of measurement with uncertainty components of concentration, volume, mass, precision and purity of the standard solution, obtained the expanded uncertainty value with a 95 % confidence level was ± 0.197 mg/kg and uncertainty percentage value was 10.43 %.
Downloads
References
[2] Departemen Laboratorium dan Instruksi Kerja. 2017. Validasi/verifikasi Metode Pengujian. Bontang: Pupuk Kaltim.
[3] Alvinuary, A., A.S. Panggabean dan W. Astuti. 2017. Validasi Metode Analisis K2O dalam Pupuk NPK menggunakan Spektrofotometer Serapan Atom (SSA). Prosiding Seminar Sains dan Teknologi FMIPA Unmul. Vol. 2, No. 2, Hal. 822-826.
[4] Destiana, L.G.V., A.S Panggabean dan Rudi Kartika. 2017. Pengembangan Metode Rapid Test Preparation dalam Penentuan Kadar Inherent Moisture dan Total Sulfur dengan Metode yang dipergunakan oleh ISO (International Organization for Standardization). Jurnal Atomik, Vol. 02, NO. 1, Hal. 175-182.
[5] Napitupulu, R.M., D. Julia dan A.S. Panggabean. 2019. Validasi Metode Penentuan Logam Mangan (Mn) dalam Oli Lubrikan dengan Metode Pengenceran Langsung Menggunakan Spektrofotometer Serapan Atom (SSA). Indo. J. Chem. Res., Vol. 6 No. 2, Hal. 94-100.
[6] Anggraini, R., R. Hairani dan A.S. Panggabean. 2018. Validasi Metode Penentuan Merkuri pada Sampel Waste Water Treatment Plant (WWTP) dengan Menggunakan Teknik Bejana Uap Dingin Spektrofotometer Serapan Atom (CV-AAS). Jurnal Kimia Mulawarman, Vol. 16, No. 1, Hal. 10-15.
[7] Chan, C.C., H. Lam, Y.C Lee dan X. Zhang. 2004. Analytical Method Validation and Instrument Performance Verification. New Jersey: Wiley-Interscience A. John Wiley & Sons, Inc.
[8] EURACHEM/CITAC Guide CG 4. 2012. Quantifying Uncertainty in Analytical Measurement, Third Edition. ISBN 978-0-948926-30-3.
[9] Miller, J.C. dan J.N. Miller. 1991. Statistika untuk Kimia Analiik Edisi Kedua. Diterjemahkan oleh Suroso. Bandung: Institut Teknologi Bandung.
[10] Harmita. 2004. Petunjuk Pelaksanaan Validasi Metode dan Cara Perhitungannya. Majalah Ilmu kefarmasian. Vol. I, No.3, Hal. 117-135.
[11] Riyanto. 2014. Validasi dan Verifikasi Metode Uji: Sesuai dengan ISO/IEC 17025 Laboratorium Pengujian dan Kalibrasi. Yogyakarta: Deepublish
.[12] Torowati dan B.S. Galuh. 2014. Penentuan Nilai Limit Deteksi dan Kuantitasi Alat Titrasi Potensiometer untuk Analisis Uranium. Pusat Teknologi Bahan Bakar Nuklir Kawasan Puspitek, Serpong. No. 13, VII, Hal. 9-15.
[13] Rohman, A. 2014. Validasi dan Penjaminan Mutu Metode Analisis Kimia. Yogyakarta: Gadjah Mada University Press.
[14] Pratiwi, R., A.S. Panggabean dan Alimuddin. 2015. Validasi Metode Uji dan Estimasi Ketidakpastian Penetapan Kadar Ion Cu dan Zn dalam Air Limbah Secara Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Prosiding Seminar Nasional Kimia FMIPA Unmul. Hal. 29-38.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
This license requires that reusers give credit to the creator. It allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, even for commercial purposes. If others remix, adapt, or build upon the material, they must license the modified material under identical terms.